How It Works

Bolt Boss is quick and easy to use, and an instruction guide is included with every starter kit.

Step-by-step Instructions

  1. Identify leak area
  2. Clean excessive caulking from threads
  3. Cut 1/4” deep slot for screwdriver
  4. Run thread chaser down to nut and back
  5. Remove nut and washer, holding bolt with scraper if needed
  6. Run thread chaser to tank wall and back
  7. Thread Bolt Boss until O ring is hand tight on wall, remove scraper
  8. Injector on grease nipple, inject sealant, watch for leak reducing
  9. Remove Bolt Boss, reinstall washer and nut
  10. Repeat procedure with the bolts on either side of the leak

Customer experiences